How To Use A Rabbit Vibrator?

Granted, the vibrator rabbit and other high-tech dual-actions are somewhat more complicated than your run of the mill slimline. But these fantastic toys are beyond doubt worth a try, so read up and get geared up to join the rabbit revolution.

The number one thing to do is take a look at your vibrator rabbit and identify the two key parts: The "shaft," which is the portion that looks like a phallus or penis, and an external "bunny" clitoral stimulator. 
Then, make for sure you've got your batteries installed in the approved manner.

Conduct experiment with the controls before you have fun with your toy. Depending on the type of vibrator rabbit you have and the controller that powers it, you'll most likely be able to control two separate functions: The shaft will typically rotate for internal stimulation and the bunny (or other clitoral stimulator) will vibrate against the clitoris for external stimulation. Play with the controls until you understand which control operates which characteristic and what kind of action you can expect from each.

Next you'll need to apply some lubricant. Most toys perform well with a water-based lubricant. Apply the lube first to the shaft of the vibrator rabbit. About a dime's worth of lubricant in your hand should do the job. You'll also probably get pleasure from the experience further if you apply lubricant to yourself and the clitoral stimulator. 
Prior to turning on your toy, start the ball rolling by inserting the shaft gradually into your vagina, with the bunny facing up. You'll know you have everything inserted properly when the bunny's ears are roughly lined up over your clitoris. If your bunny vibrator also has rotating pearls or beads in the shaft, these will probably be near your vaginal opening at this point.

Now you're raring to go to turn on your toy. Be certain to start with the vibration and rotation on low or slow rate until you're comfortable increasing the level of intensity. If you're not used to the sensation of a vibrator rabbit, the clitoral stimulator in particular may well seem too intense. If that's the case, simply put a cloth, sheet or other bit of material over the bunny's ears to decrease the sensation a bit.

As soon as you're finished, simply slide the shaft out and clean your vibrator rabbit with the recommended cleaning method for that material. For the best results, remove the batteries from your vibrator rabbit before you store it to expand their life span.